Find a Rep

News & Events

Sturtevant Articles

Sturtevant’s products and services have been in the news. Read about the articles as reported in the trade press.

2014 | 2013 | 2011 | 2010 | 2008 | 2007


Milling Journal CoverDecember 2, 2014

Sturtevant Company Profile in Milling Journal

A Sturtevant company profile in the Fourth Quarter 2014 edition of the Milling Journal.

August 2, 2014

Milling Trona in Dry Sorbent Injection

This article explains how sorbent particle size reduction with the Sturtevant Simpactor FGT Series Pin Mill boots efficiency in stack gas pollutant removal


December 30, 2013

Air Classification for Low-Ash Meal Processing

An article in the December 2013 issue of Render Magazine written by Sturtevant's Senior Product Manager, Joe Muscolino.

June 1, 2013

Extending the Life of Coal Fired Plants Through the use of Dry Sorbent Injection

An article in the June 2013 issue of Power Engineering on extending the life of coal powered plants through the use of the Simpactor FGT

May 1, 2013

Milled DSI: An Alternative to Converting/Closing Your Plant

An article in the May 2013 issue of Powder Bulk Solids about an alternantive to closing coal powered plants with the use of Simpactor FGT pin mills


May 1, 2011

Milling Semi-Abrasive Minerals

An article in the May 2011 issue of Powder Bulk Solids by The Product Manager for DSI mills at Sturtevant, Steve Coulombe.

March 1, 2011

Isle of Style – Innovative Air Classification Technology

An article in the March 2011 issue of Pit and Quarry by veteran freelance writer Carol Wasson.


November 1, 2010

Mechanical Centrifugal Air Classifiers

An article in the November 2010 issue of Chemical Engineering by The Product Manager for the Air Classification line at Sturtevant, Joe Muscolino.


December 1, 2009

Real time Trona

Developing optimal milling solutions for FGD-grade trona can reduce injection levels and increase fly ash recycling, as Steve Coulombe of Sturtevant and Alon Vaisman of Malvern explain


February 9, 2008

No Water Required

This article is about using the Whirlwind Air Classifier as an alternative to wet wash systems for dedusting crushed stone.


April 1, 2007

Minimizing Minus No. 200 Mesh

An article in the April 2007 issue of Aggregates Manager by veteran freelance writer Carol Wasson.