Roll Crusher: |
| 1. |
What is a good application for a Roll Crusher? |
| |
Reduce dry, friable, fractional-size process material to uniform granular sizes. |
| 2. |
What Rolls materials are available? |
| |
Heat treated Carbon Steel as standard, Hardened
Alloy Steel, Manganese as options (Alumina Oxide available for some models.)
|
| 3. |
How is product fineness controlled? |
| |
The Rolls gap is manually adjusted by a handwheel.
|
| 4. |
How much can process material feed be reduced?
|
| |
Ideally, 3:1, or less, feed-to-product ratio; 4:1 maximum.
|
Jaw Crusher:
|
| 1. |
What is a good application for a Jaw Crusher?
|
| |
For coarse and intermediate Crushing.
Reduce dry, friable, soft or hard chunks of process material to fractional sizes.
|
| 2. |
How is product size controlled? |
| |
Jaws gap is manually adjusted by handwheel.
|
| 3. |
What Jaw Plate materials are available?
|
| |
Cast Ni-Hard is standard, Manganese and Cast Steel as options.
|
Rotary Crusher:
|
| 1. |
What is a good application for a Rotary Crusher?
|
| |
Reduce large, dry, friable, chunks of soft to moderately hard process
material to uniform coarse or granular sizes at high capacities.
|
| 2. |
How is product size controlled?
|
| |
Product size is manually adjusted by handwheel increasing or reducing gap
between crushing elements.
|
| 3. |
How are wear areas accessed for maintenance?
|
| |
All models are “Open-Door” door design for easy access to wear parts for
inspection and maintenance.
|
| 4. |
What is the material construction of the Wear Elements?
|
| |
Cast “Chrome Iron” is standard, Cast Ni-Hard is an option.
|
Sample Grinder: |
| 1. |
What is a “Sample Grinder”? |
| |
Reduce dry, friable, fractional-size process material to uniform granular
sizes.It’s a disc mill with one rotating and one stationary Grinding Disc.
|
| 2. |
What is a good application for a Sample Grinder? |
| |
Fine grinding of small fractional, dry, friable materials.
|
| 3. |
How is product size controlled? |
| |
Product fineness is adjusted manually by increasing or relieving pressure
on the Grinding Discs with a handwheel.
|
| 4. |
Are various Grinding Disc materials available?
|
| |
Cast Iron (as standard), Cast Ni-Hard and Alundum, which is an aluminum
oxide based stone for abrasive materials, as options.
|
Hammer Mill: |
| 1. |
What is a good application for a Hammer Mill? |
| |
Size reduction for any dry, friable, soft to medium hard material to
granular powder not requiring a tight product size distribution. |
| 2. |
How is product size controlled? |
| |
Grate, or Screen spacing determines product size.
|
| 3. |
How are wear areas accessed for maintenance? |
| |
All models are “Open-Door” door design for easy access to wear parts for
inspection and maintenance.
|
| 4. |
What is the material of the impacting Hammers?
|
| |
Alloy Steel (can be supplied hardened),
liners are also Alloy Steel.
|
